Model N Parts List
MOTOR ASSEMBLY
1/2 H.P. Capacitor motor 48 frame
Capacitor for 1/2 H.P. motor
Forward/Reverse switch
Linemaster foot switch w/ 6 Ft cord (used prior to S/N 10099)
Switch box (includes cord lamp)
TBS #3218 air activated on/off switch (after S/N 10099- Nov. 94)
FP-1A air bulb foot pedal assy w/ hose (after S/N 1009- Nov. 94)
FP-1 foot pedal only
Leviton GFI assy w/ 20' cord
N-8 motor pulley
4L310 V-belt (for 9" pulley)
FRAME ASSEMBLY
N-1 Frame (includes 8 rubber feet)
Rubber feet (8 req'd)
N-6 Bearing bracket (2 req'd)
6205ZZ Ball bearing (2 req'd)
DRUM ASSEMBLY
N-2-A Outer drum assembly (consists of N-2 drum, N-5-1bracket, N-5-2 Guide
Tube)
........N--2 Outer drum (less guide tube &
bracket)
........N-5-1 Bracket (casting that holds guides
tube)
........N-5-4 Washer for N-5-2 guide tube
........FL-102-12 Bronze bearing (fits in N-5-1
bracket)
#10 RD HD screw (holds DN-6 anchor in drum)
N-5000-175 Retaining ring (secures guide tube in N-5-1 bracket)
10-24- x 3/8" Screws (4 req'd - holds N-5 bracket to outer drum)
1/4"-20 Wing nuts (4 req'd per drum)
N-3 Inner drum casting
N-4 Drive shaft (includes 2 keys)
N-7 Large pulley (9" Dia)
1/2" x 1" Hex head cap screw (holds N-12 disc on shaft)
3/16" x 3/16" x 1/2" Key (holds N-12 disc on shaft)
N-12 Clutch drive disc (2 req'd)
N-13 Clutch friction disc (2 req'd)
N-14 Clutch spring
N-15 Clutch key
1/2" SEA flat washer (for N-14 spring)
MISCELLANEOUS
PARTS
N-9-1 T Handle for dualmatic cart
N-9-2 Hold down clip w/ bolts & nuts (for dualmatic cart - 2 req'd)
Rubber tip for dualmatic cart
Torque wrench (used to check clutch settings)
Torque wrench adaptor for Mod N clutch
PRODUCTION CHANGES
July ..14, 70 ..Serial
# 2099 First new style dualmatic cart
July ....3, 75 ..Serial
# 3778 Changed to 9' pulley
Nov ......, 75 ...........................Started
us of new DN-3 set screw (1/4"-28 thread)
June 10, 77 ...Serial # 4457 Started production
of # 48 frame motor
July ..20, 77 ...Serial
# 4500 Started production of built-in clutch
June ...8, 78 ...Serial
# 4908 Started production of
Nov .....3, 94 ...Serial
# 10099 Started using air actuated foot switch
REPLACEMENT
PARTS FOR CABLES
DH-5 Fitting (replaces DN-25 on 1/2" cables to attach DH series tools
1/8" x 5/8" Spirol pin (optional pin to connect cables or tools)
3/32" x 7/16" Spirol pin (connects dualmatic inner to DN-1 or 2
couplings)
1/8" HEX wrench (fits DN-3 set screws)
1/8" T-Handle wrench (fits DN-3 set screws)
DN-1 Male (rear) coupling
for dualmatic cable
DN-2 Female (front) coupling for dualmatic cable
DN-4 Inner cable fitting
N-8 Splicer for dualmatic inner cable
SPECIAL CABLES AND ADAPTERS
10' Dualmatic cable
Dualmatic inner cable Per Ft.
DN-9-1 Fitting (provides for DH-series drop head tools)
DN-10-1 HUB (tool hub for DH-series drop head tools)
DN-17 Short drop head tool combination (DN-9-1 and DH-10 tool)
DN-22 Adapter (adapts DN tools to old style H-13 monowire fitting)
DN-24 Adapter (adapts J tools to dualmatic cable)
SJ-10 Adapter (adapts dualmatic cable or tools to J cable)